Doors Dublin

Complete Door Services

We supply, measure, fit, install, replace and customise doors for homes and businesses across Dublin and County Dublin.

Before any work begins, we check the opening, take accurate measurements and assess the existing door, frame, hinges and hardware. In many cases, the full frame does not need to be replaced. Sometimes fitting a new door into the existing frame is enough. In other cases, the frame may need adjustment, repair, repainting or replacement.

We explain the available options before the work starts and help you choose a suitable door, frame, finish, glass and hardware.

Door Measuring And Assessment

Correct measurements are essential for a door to open, close and lock properly.

We measure the height, width, depth and condition of the opening. We also check whether the opening is square, whether the floor level affects the door clearance and whether the existing frame can be reused.

During the assessment, we check:

After checking the opening, we can recommend whether you need a new door only, a door and frame, frame repairs or a complete replacement.

Door Installation

Door installation can include the door, frame, hinges, handles, locks, threshold, seals, trims and finishing work.

The exact installation depends on the property and the condition of the existing opening. A new door can sometimes be installed into the current frame. If the frame is damaged, twisted, badly fitted or unsuitable for the new door, it may need to be repaired or replaced.

We check the alignment of the door and make the necessary adjustments so that it opens and closes correctly. We also check the gaps around the door, hinge movement, handle operation, lock position and contact with the frame.

Installation options can include:

Door Fitting

Door fitting involves preparing and adjusting a door so that it fits the opening correctly.

This may include trimming the door, preparing hinge recesses, positioning the hinges, drilling for handles and locks and adjusting the door to suit the frame.

When an existing frame is in good condition, it may be possible to keep it and fit only the new door. We check whether the existing hinge positions can be reused or whether new hinge positions are required.

Door fitting can include:

The aim is to make sure the door fits the opening, moves freely and closes without rubbing against the floor or frame.

Door Replacement

Door replacement does not always mean replacing everything around the door.

We first inspect the existing door, frame, hinges, hardware and opening. If the frame is straight and in usable condition, it may be possible to replace only the door. The existing frame can sometimes be repaired, adjusted or repainted instead of removed.

A replacement may include:

This approach allows the work to be matched to the actual condition of the opening rather than replacing parts that can still be used.

Door Supply, Frames & Hardware

We help customers find suitable doors through our trusted suppliers in Ireland and the European Union.

Doors are available in different materials, sizes, colours, finishes and designs. Depending on the type of door, options may include solid panels, glazed sections, decorative glass, different handle styles and matching frames.

We can help source:

Where applicable, doors and components can be supplied with the relevant manufacturer information and certification.

Door Frames

The condition of the frame affects how the door fits, closes and locks.

We inspect the frame for movement, damage, rot, poor alignment, loose sections and previous alterations. A frame that is still sound may only need adjustment, filling, sanding or painting.

Depending on its condition, we can:

The frame is assessed separately from the door so that unnecessary replacement can be avoided.

Door Hardware

We can help select hardware that suits the door, frame and way the door will be used.

The correct hardware depends on the weight, material, thickness and opening direction of the door.

Available items may include:

Hardware can be selected to match the colour and style of the door.

DOOR PAINTING AND COLOUR OPTIONS

Doors and frames can be supplied or finished in a wide range of colours.

Depending on the material and door type, more than 100 colour options may be available. We can help match the door to the exterior of the property, interior walls, flooring, kitchen units, windows or existing woodwork.

Colour and finish options may include:

Existing frames may also be prepared and repainted when replacement is not required.

Glazed Doors

Glass can be used in internal doors, external doors, French doors, patio doors, aluminium doors and custom-made doors.

Glazed sections can bring more natural light into hallways, kitchens, living rooms, entrances and commercial spaces.

Options may include:

The available glass specification depends on the door type, location and supplier.

Internal Doors

Internal doors divide rooms, reduce noise, provide privacy and form part of the interior design.

We can supply and fit internal doors for houses, apartments, offices and other properties. Existing frames may often be reused if they are in suitable condition.

Internal door options may include:

Handles, hinges and locks can be selected to suit each room.

External Doors

External doors need to fit the opening correctly and provide reliable closing, weather protection and security.

We check the frame, threshold, seals, lock positions and door alignment before recommending a replacement or installation method.

External door options may include:

Composite Doors

Composite doors are available in a wide range of colours, panel designs, glass layouts and hardware combinations.

They can be supplied with different handles, locks, letter plates, knockers, side panels and frame colours. The opening is measured before ordering to make sure the door set matches the required dimensions.

Solid composite doors

Part-glazed composite doors

Different frame colours

Matching or contrasting hardware

Standard and custom configurations

French Doors

French doors are commonly used between a home and garden, patio, balcony, dining room or living space.

They usually consist of two doors and can include large glazed areas. We measure the full opening, check the threshold and assess whether the existing frame can be reused.

French door options may include:

Patio Doors

Patio doors connect internal living areas with gardens, terraces and outdoor spaces.

The correct option depends on the opening size, available space, frame condition and preferred opening system.

Patio door options may include:

Aluminium Doors

Aluminium doors can be used for entrances, patios, glazed openings and modern internal or external designs.

They are available in different configurations, colours and glass options. Powder-coated finishes can provide a consistent colour across the door and frame.

Aluminium door options may include:

Wooden Doors

Wooden doors are available in different timbers, veneers, colours and finishes.

Depending on the design and supplier, options may include:

We can help select a suitable finish, glass layout, frame and hardware.

Metal Doors

Metal doors can be made in standard or custom sizes and may be suitable for entrances, storage areas, workshops, utility spaces and selected commercial uses.

They can be supplied with powder-coated finishes in different colours.

Single metal doors

Double metal doors

Glazed metal doors

Solid metal doors

Custom-size metal doors

Powder-coated doors

Matching metal frames

Different handles and locks

Custom hinge and hardware positions

We do not advertise specialist fire-door or security-door work unless it is specifically agreed and suitable certification and documentation are available.

Custom Doors

Standard-size doors are not suitable for every opening.

If the required door cannot be sourced through our regular suppliers, selected doors can be manufactured to suit the required measurements, material, design and finish.

Custom options may include:

Every custom order begins with accurate measurements and a check of the opening.

Designer Doors

Designer doors can combine custom dimensions, colours, materials, glass and hardware.

The design can be based on the style of the property, an existing door, a reference image or a specific combination of features.

Possible options include:

The available design depends on the material, dimensions and manufacturing method.

Doors For Different Rooms

Kitchen doors can refer to the room entrance, a door leading outside or a glazed door connecting the kitchen with another part of the property.

We can help select a door that suits the available space, light requirements and interior finish.

Internal kitchen doors

Glazed kitchen doors

Wooden kitchen doors

Painted kitchen doors

Kitchen-to-garden doors

Custom-size doors

Bathroom Doors

Bathroom doors need to provide privacy and fit correctly without catching on flooring or surrounding finishes.

Depending on the layout, suitable options may include painted, wooden, panel or frosted-glass doors.

We can fit:

Bedroom Doors

Bedroom doors can be supplied in styles that match the rest of the internal doors in the property.

Options include painted, wooden, panel, flush and glazed designs. We can fit a single bedroom door or replace several internal doors as part of the same project.

Available options may include:

Doors For Homes And Businesses

We supply and fit doors for houses, apartments, rental properties, offices, shops and other business premises.

The service can include measuring, sourcing, fitting, replacement, frame work, painting, glass and hardware.

Start a WhatsApp Chat or fill out the contact form. Send us the approximate measurements, photos of the existing door and a short description of what you need. We will review the request, help you choose a suitable option and reply as quickly as possible.